---

Blind Spot - Attention Angles Morts Truck Sticker (17 x 25 cm) Blind spot warning stickers are mandatory in France from 1 January 2021. From this date, all heavy vehicles, trucks, buses, above 3.5 tonnes are required to have a blind spot warning sticker on the car. R 313-32-1 is an official traffic rule that has been included in the French Highway Code since January 1st. Failure to comply with this rule will result in Class 4 fines (minimum 90 euros). So order your blind spot warning stickers from Truckwash 1 Group now and avoid fines! We use the stated dimensions of 25 cm height x 17 cm width. According to traffic regulation R 313-32-1 a number of colour references are given. We adhere to the CMYK values ​​that are indicated here. Good to know! It is important to know exactly where the stickers should be mounted on the vehicles, because fines can also be issued if the stickers are placed incorrectly. Trucks and tractors For trucks and tractors, the stickers must be placed on both sides of the vehicle and on the rear. On both sides, the stickers must be placed on the front section, at a height of between 0.9 and 1.5 metres measured from the ground. On the rear of the truck or tractor, the sticker must be placed on the right side. Here too, the sticker must be placed at a height of between 0.9 and 1.5 metres from the ground. Trailers and semi-trailers Stickers must also be applied to trailers and semi-trailers. On the rear, the sticker must be applied to the right-hand side at a height of between 0.9 and 1.5 metres, just as on trucks and tractors. In addition, the stickers must also be applied to each side. On the bodywork, this must be done within the first metre (at a height of 0.9 - 1.5 metres). For semi-trailers, the stickers must be applied to both sides within the first metre behind the coupling plate (at a height of 0.9 - 1.5 metres). Exceptions There are a number of exceptions to the rule. This applies to vehicles where it is technically impossible to affix the stickers to the prescribed places on the vehicle. In this case, the stickers must be affixed to the nearest possible height, as long as it is within the limit of 2.10 metres. Some examples of vehicles where the stickers may be placed in other places are car transporters, tractors for trailers, container chassis, flatbed vehicles, tank vehicles, adjustable arms for tipper trucks and dollies. On these vehicles it is not possible to place the markings on the rear of the vehicle, therefore the sticker may be placed in a place that is compatible with the characteristics of the vehicle. Vehicles where it is structurally impossible to apply the stickers to the sides and/or rear are exempt from the blind spot sticker scheme. These warning stickers are made of a monomer material that is finished with an extra gloss laminate. Due to the extra laminate layer, the stickers are extra scratch and weather resistant and therefore suitable for outdoor use on vehicles. These blind spot stickers are 17 centimeters wide and 25 centimeters high (17 x 25 cm, wxh) and are finished with rounded corners. You can order the stickers from 1 piece.

---

Soort product: Blind spot warning stickers for heavy vehicles

Inhoud/afmeting:

• 17 x 25 cm

Toepassing: Apply the blind spot warning stickers to heavy vehicles over 3.5 tonnes, as mandatory in France since 1 January 2021. Ensure good visibility and protection against scratches and weather influences. Order from Truckwash 1 Group to avoid fines.

Extra kenmerken:

• Mandatory in France since January 1, 2021
• Sustainable monomer material
• Extra gloss laminate for scratch and weather resistance
• Avoid fines
• Apply for good visibility
• Use on heavy vehicles over 3.5 tons